Bereg Octagon All-Season Hot Tent

Bereg Octagon All-Season Hot Tent

The Bereg Octagon combines generous living space with a packable design for serious four-season camping. Its straight walls, panoramic windows, hinged door, and stove-ready construction create a comfortable basecamp for extended stays in the outdoors.

Capacity

• Up to 6 people using folding beds with a stove installed
• Up to 13 people in sleeping bags

Dimensions and Packed Size

• Corner-to-corner diameter: 4.6 m
• Wall-to-wall diameter: 4.4 m
• Hub-to-hub diameter: 4.15 m
• Centre height: 2.24 m
• Packed weight: 38 kg
• Packed dimensions: 1.26 × 0.4 m

Four-Season Comfort

• Double-wall construction: The air space between the inner and outer tent helps retain warmth in cold weather and reduce heat buildup in warmer conditions. Thermally taped seams help prevent leaks, while condensation forms between the layers instead of inside the living area.
• Six panoramic windows: Three wall windows and three roof windows provide natural light, wide views, and flexible ventilation. Removable PVC window panels are included.
• Adjustable roof vents: Supported vents are easy to open and secure, helping you manage airflow in changing weather.
• Hinged entrance door: The included hinged door provides quick, convenient entry while helping reduce heat loss.
• Convertible canopy wall: One wall folds outward using the included support poles to create a sheltered outdoor area. An optional hook-and-loop veranda can be attached for additional covered storage.
• Removable floor: The included Oxford fabric floor zips to the inner tent and sits approximately 10 cm above ground level. It can be replaced with an optional zippered PVC floor or insulated three-layer winter floor.

Wood-Stove Ready

The Octagon is designed for use with a compatible wood stove. A heat-resistant chimney opening is built into the roof, and a lower ventilation window supplies fresh air near the stove area.

• Chimney opening: 84 × 100 mm
• Protective inner and outer chimney flaps
• Metal reinforcement plates help secure the stove pipe
• Lower ventilation window: 20 × 20 cm
• Removable mosquito mesh allows access for a heater exhaust pipe

If you require a different chimney-opening size, include the required dimensions in your order notes.

Practical Interior Features

• Two side entrances with mosquito mesh
• Wall pockets for smaller gear
• Mesh storage shelves in the roof and folding wall
• Removable centre support pole for added stability during rain or snow
• Reflective guy-line attachment points
• Double perimeter snow skirt with stake loops for wind protection

Materials

• Frame: 10 mm fibreglass poles with durable plastic hub mechanisms
• Outer tent: Water-repellent Oxford 300, PU 4000
• Inner tent: Water-repellent Oxford 240, PU 2000
• Windows: Fine mosquito mesh and frost-resistant transparent TPU film rated to -50°C

Setup

1. Lay out the tent with the roof facing upward and spread it evenly.
2. Open and lock each side wall by pulling the centre strap.
3. Enter the tent and push the roof upward until the frame locks.
4. Secure the tent using all guy lines and stakes.

Important: Always open the side walls before opening the roof. Reversing the sequence may damage the frame. In windy conditions, secure the first opened wall before continuing. Close the wall, windows, and doors before packing the tent in reverse order.

Safety

• Secure the tent with all guy lines and stakes.
• Do not use the tent in winds exceeding 17 m/s.
• Do not pitch near trees during windy weather.
• Maintain continuous ventilation and keep exits unobstructed.
• Keep the tent a safe distance from open flames.
• Open flames, gas appliances, and liquid-fuel appliances are prohibited inside the tent.
• Use care around frame components during setup and takedown.
• Children must be supervised by an adult.