Bundutop Standard
BunduTop Standard - Electric Rooftop Tent
The BunduTop is our revolutionary electric rooftop tent that sets up in just 30 seconds at the press of a button using Pro Pitch Technology. With 360-degree access, all-aluminum construction, and solar panel compatibility, this is the ultimate rooftop camping solution.
IMPORTANT SHIPPING INFORMATION
Shipping to hub only - pickup requires trailer. Shipping is free, however there is a fuel surcharge of $238.82.
Configuration
All black top and olive fabric. Includes added room and side walls.
Pro Pitch Technology - 30 Second Setup
Fully electric operation means the tent is fully erect with awnings in 30 seconds at the press of a button. Closing is just as easy - all sides and awnings fold away automatically in 30 seconds. No manual setup required.
360-Degree Access & Ventilation
Entry from any side gives you complete 360-degree access and view. Each window/door is manufactured with canvas on the outside and mesh on the inside, allowing you to leave windows open for ventilation even in poor weather conditions.
Heat-Reflective Aluminum Roof
The roof is a raw aluminum sheet to ensure maximum heat reflection - the main reason you can sleep comfortably cool inside, even in direct sunlight. The roof weighs 20kg and can carry an additional 25kg if evenly spread, perfect for solar panel installation.
Solar Panel Ready
Includes solar wiring (standard since 2017) that runs underneath the roof-lining. Red Brad Harrison plugs on the roof and bottom of the tent provide easy connection to your solar panel and vehicle wiring. Maximum solar panel weight: 25kg (must be evenly spread with supports running the entire length of the roof).
Powerful Winch System
The 2000lbs winch motor lifts and lowers the tent using 3mm Dyneema rope on a pulley system, providing reliable and smooth operation.
Comfortable Interior
The mattress is 200 x 125 x 10cm, made from high-density foam. A double bed fitted sheet fits perfectly. The foam-backed roof-lining absorbs moisture and condensation. Leave your bedding inside when closing the tent for convenience.
Versatile Mounting
The frame built into the bottom provides additional strength and versatile mounting options. Can be bolted directly to your load bars or roof rack. Optional stainless steel frame can accommodate an overhang of up to 50cm.
Weather Tested
Extensively tested in various locations and weather types. Proven to withstand 50 mph winds and performs well in snow.
Key Features
- Full electric operation - 30 second setup and takedown
- Shade awning around all four sides
- 210 x 135 x 30cm (closed)
- 210 x 135 x 103cm (opened)
- 360-degree access from any side
- Window covers zip open/closed from inside
- Insulated roof inside
- All aluminum construction
- Heat-reflective aluminum roof
- Solar panel ready with included wiring
- 2000lbs winch motor with Dyneema rope
- Built-in aluminum frame for mounting
- Tested to 50 mph winds
Includes
- Solar wiring with Brad Harrison plugs
- 10cm high-density foam mattress (200 x 125 x 10cm)
- 12V outlet inside
- LED light inside
- All aluminum construction ladder (double sided)
- 2 interior storage pockets
Specifications
- Closed: 210 x 135 x 30cm
- Open: 210 x 135 x 103cm
- Total Weight: Approx. 80kg (tent: 73kg, ladder: 7kg)
- Roof Weight: 20kg (can carry additional 25kg)
- Mattress: 200 x 125 x 10cm high-density foam
- Winch: 2000lbs with 3mm Dyneema rope
Important Usage Notes
- Read the tent manual before purchase to familiarize yourself with operation and components
- Arrange bedding flat so it doesn't hook into the rope system
- Leave some windows open or close only mosquito nets when lowering to allow trapped air to escape
- Ensure zips are completely zipped down when entering/exiting (not designed to carry weight)
- Do not open the tent while latches are still closed - this will damage the tent
- In extremely cold areas, place carpet under mattress for additional insulation
- In extreme humidity and heat, ventilate the tent to prevent condensation underneath the mattress
Pros
- Lifts or lowers at the touch of a button
- Leave bedding inside
- Rigged for solar panels
- LED light and 12V outlet inside
- Double-sided ladder (specify round or square)
- Lightweight at approx. 80kg
Cons
- Takes up significant roof rack space